Payment & Shipping Terms:
|Name:||Self Tapping Screw Sleeve Tool||Texture Of Material:||304|
|Place Of Origin:||Henan, China||Manufactor:||Xiyangyangjixie|
|Thread Specification:||M2.5-M12||Application Scope:||Install The Screw Wrench|
M4 Self Tapping Screw Sleeve,
Self Tapping Screw Sleeve,
C4-50 m4 self tapping insert
Special Installation Tool For Self-tapping Bushing Thread Sheath
Precautions for installation of self-tapping screw sleeves
1. According to the processing materials of different screw sleeves, refer to the drilling size specifications for pre-drilling processing. When the hardness of the corresponding material is high, please slightly increase the drilled bottom hole within the drilling range.
2. Screw the self-tapping screw sleeve into the thread head of the front end of the tool, and the slotted end of the screw sleeve is downward. When installing, please make sure that the self-tapping screw sleeve is vertically aligned with the bottom hole, and must not be tilted.
3. The bottom hole of the installation screw sleeve can also be tapped to guide the guide teeth for 2-3 turns, which plays a role of installation guide and avoids the installation screwing in tilt.
|Name||Self tapping screw sleeve tool|
|Texture of material||304|
|Henan, China||Henan, China|
|surface treatment||Stainless steel c4-50|
|Application scope||Install the screw wrench|
When the installation quantity is small, the simple installation method can be adopted,
specifically the method of bolt + nut of corresponding specification. As shown in the figure,
fix the self tapping screw sleeve on the corresponding screw, and fix it with the same type of nut to make the three into a whole.
Screw the screw sleeve into the bottom hole with a wrench, and then exit the screw.
When the number of installation is large, special screw sleeve installation tools can be used for installation.
Refer to the following figure for specific operation methods. The tail end of the tool in the figure is a hexagon head,
which can be connected with a manual tapping wrench or an electric or pneumatic tool.
Precautions for installation of self tapping screw sleeve:
1. For different price materials, refer to the drilling size specifications, and carry out pre drilling processing.
When the hardness of the corresponding material is high, please slightly increase the bottom hole within the drilling range.
2. Install the self tapping screw sleeve into the front end of the tool with the slotted end downward,
and contact the workpiece vertically. During installation (1-2 pitch), please make sure to align the bottom hole and not tilt it.
When tilt is found, do not reverse the tool and readjust it for reuse. When you enter 1 / 3-1 / 2, you can't go back. In addition,
please do not reverse the rotation of the tool, otherwise it will cause product failure.
Contact Person: Mr. young li